|December 4, 2008 - The tire does stick out a bit.|
About as much as I'd expected based on my measurements, which is reassuring. A rough test fit shows that the Rabbit fender flare covers it almost perfectly. I'll pull one of the RA-1s off and test fit with that as well, but I have a good feeling about this - as long as I stick close to the stock +45 wheel offset, anyhow. I should probably make sure the +30 wheels with 205/50-15s fit, as that's what half of my race tires are.
The fairly radical camber is because I assembled this suspension out of spare parts and everything's just finger-tight. No attempt at alignment has been attempted!
tags: body, flares, wheels, tires, suspension