Slow Car Fast
LIFE OF A GT
Click to see the next entry
June 15, 2011 - Here's an example of how the primer has helped with the shape of the car.
This is the transition from the side of the car to the fender flare in the rear. The different colors are different layers, with the yellow body filler on the bottom. In order to get that guide coat fully off, I had to sand down further in one section of the flare. The result now has a smoother shape to it, cleaning up a bit of a step in the angle that was invisible before. There's still a bit of guide coat visible at the right of the picture, I'll get it later. You can see the amount of material that's been sanded off at the left - getting this car dust-free again for the color coat may be a challenge.
The primer coat is proving to be fantastic at finalizing the shape of the car. Sections that were just a little rough are cleaning up and everything is flowing together really well. I'm really happy with it. It's also moving quickly because the primer sands so well. I'm using both 240 grit paper and some fine sanding blocks for this step. The foam sanding blocks are great for dealing with those compound curves, while the paper on longer blocks help make sure everything's flat.
tags: suspension, body